Sawmill Service Plans

Enjoy the best service available

Service Loops

" Excellent customer service. "

Jerry P , Georgia

View More Testimonials

Wood-Mizer offers reasonable rates and flexible service plans to owners of new and used sawmills. Our network of locations makes service calls even more convenient for the customer. (All terms and offers are subject to change without notice.)

Emergency Service - Emergency service is when you can not wait for a tech to be in your area. Charges for an emergency service are $1.75 per mile each way with labor charge of $65.00 per hour on site.

Service Loops - We perform Service Loops to do Normal Maintenance during the year at your mill location. You can select one of our service plans or service by the hour or select between Silver, Gold, and Platinum plans. These service plans cover normal maintenance levels on you mill based on the number of hours that your mill has on it. Silver 500 or less hours, Gold 500 to 2000 hours and Platinum 2000 and more hours. This is the most cost efficient way to service your mill.

Sawmill Service Plans

Silver - $295

500 hours or less

INSPECT/CHECK
Blade Guide Rollers
Drive Belt Tension
Brake Adjustment
Power Feed Belt and Check Tension
Power Feed Chain Tension
Up/Down Belt and Check Tension
Up/Down Chain Tension
Alternator Belt Tension













LUBE:
Top Off Cylindrical Bearing with Fluid*
Chrome Tension Rods
Power Feed Chain
Track Oiler
Up/Down Chain
Mast
Blade Guide Arm
Blade Guide Arm Chain

PLUS PARTS
Parts Required:
(1) new blade
Approximately $23





ROUTINE ALIGNMENT:
Blade Tracking
Sawhead Tilt
Blade Guide Arm
Blade Guide Vertical Tilt
Blade Guide Horizontal Tilt
Blade Guide Flange Spacing
Align Side Supports
Blade Height Scale
Test Cut

 



MOTOR BRUSH INSPECTION
Motor brushes can be inspected at an hourly rate of $62 per hour.

Gold - $395

500-2000 hours

INSPECT/CHECK
Blade Guide Rollers
Drive Belt Tension
Brake Adjustment
Power Feed Belt
and Check Tension
Power Feed Chain Tension
Up/Down Belt and Check Tension
Up/Down Chain Tension
Alternator Belt Tension
Drum Switch and Lubricate
Cam Follower Bearings
Hydraulic Fluid Level
Engine Air Filter
Engine Fuel Filter
Hydraulic Hot Contact







LUBE:
Top Off Cylindrical Bearing with Fluid*
Chrome Tension Rods
Power Feed Chain
Track Oiler
Up/Down Chain Mast
Blade Guide Arm
Blade Guide Arm Chain


PLUS PARTS
Parts Required:
(2) wheel belts
(2) blade guide rollers
(1) blade
Approximately $141



FACTORY ALIGNMENT:
Sawhead Slide Pad
Blade Tracking
Sawhead Tilt
Bed Rails
Blade Guide Deflection
Blade Guide Arm
Blade Guide Vertical Tilt
Blade Guide Horizontal Tilt
Blade Guide Flange spacing
Align Side Supports
Clamp Stop/Stop Bolt
Blade Height Scale
Test Cut

Platinum - $435

2000+ hours

INSPECT/CHECK
Blade Guide Rollers
Drive Belt Tension
Brake Adjustment
Power Feed Belt
and Check Tension
Power Feed Chain Tension
Up/Down Belt and Check Tension
Up/Down Chain Tension
Alternator Belt Tension
Drum Switch and Lubricate
Cam Follower Bearings
Hydraulic Fluid Level
Engine Air Filter
Engine Fuel Filter
Hydraulic Hot Contact
Hydraulic Tensioner/
Add Fluid If Needed
Motor Mount Bushings
Gearbox Oil
Exchange Gallon of Hydraulic
Oil from Each Reservoir
Change Hydraulic Filter

LUBE:
Top Off Cylindrical Bearing with Fluid*
Chrome Tension Rods
Power Feed Chain
Track Oiler
Up/Down Chain
Mast
Blade Guide Arm
Blade Guide Arm Chain

PLUS PARTS
Parts Required:
(2) wheel belts
(2) blade guide rollers
(1) blade
(1-2) gallons hydraulic oil
(1) hydraulic filter
Approximately $212

FACTORY ALIGNMENT:
Sawhead Slide Pad
Blade Tracking
Sawhead Tilt
Bed Rails
Blade Guide Deflection
Blade Guide Arm
Blade Guide Vertical Tilt
Blade Guide Horizontal Tilt
Blade Guide Flange spacing
Align Side Supports
Clamp Stop/Stop Bolt
Blade Height Scale
Test Cut


* Drain and replace on mills with sight gauge if over 400 hours.

 

Wood-Mizer Products Inc. 8180 W. 10th St. Indianapolis, IN 46214 USA      Copyright © 2009 Wood-Mizer Products, Inc. All Rights Reserved