Industrial Equipment

HR300 - Heavy Duty Single Head Resaw
This quality, single-head resaw was designed to run all day for years with minimal maintenance. The compact size and simple operation will fit seamlessly into high production operations to small workshops.
Call us for a custom layout

Angled side rollers pull material tight against the belt and the sawing head can tilt to produce angled material.

• Flexible —resaw cants or boards, or rip lumber with thin-kerf technology
• Compact—minimum space means maximum overall mill efficiency
• Clean design—only the features you need, saving you time and energy costs
• Quality—Steel slat bed conveyor outlasts rubber belt conveyors and reduces downtime

Leave Your Comments About This Product
Power Options
10HP (7.5kW) Elec 220V 1Ph, 100Amp
20HP (15kW) Elec 230V/60Hz 3Ph, 100 Amp
20HP (15kW) Elec 380V/60Hz 3Ph, 60 Amp
20HP (15kW) Elec 460V/60Hz 3Ph, 60 Amp
25HP (18.5kW) Elec 230V/60Hz 3Ph, 100 Amp
25HP (18.5kW) Elec 460V/60Hz 3 Ph, 60 Amp
length 158" (4m)
width  1.25" - 1.5" (32mm - 38mm) 
Blade Wheel
diameter 24" (610mm)
type Belted Cast Steel
Feed System
conveyor 7.5" (190mm) Steel
feed rate 0 - 100f/min (0 - 30m/min)
Cutting Capacity
min cut height .25" (6mm)
max cut height 10.5" (267mm)
max material height 16" (406mm)
min material length 18" 457mm)
max material length Unlimited
min width 2" (50mm)
max width 10" (250mm)
Dimentions & Requirements
length 6'4" (1.93m)
width 6'10" (2.08m)
height 7'7" (2.3m)
weight 1,200lbs (544kg)

Proper tension is easily and quickly set with a single pull of a lever.

Angled side feed rollers pull material down to the conveyor without the use of overhead rolls.

The steel slat bed conveyor provides longer life than rubber belt conveyors, and reduces downtime by eliminating cuts in the belts.

The cutting head (not the track) tilts up to 8°, leaving the track flat to easily integrate into material handling systems.

Share This Page with Friends:
Email this page to a friend