Industrial Equipment

Transfer Deck
This unique piece is a brilliantly simple way to transfer material efficiently. There are no chains, gears, or motors, which makes operation simple with little maintenance.
Call us for a custom layout

After the material moves onto the rollers from the Incline Conveyor, a sensor activates an air bag which is connected to a set of inclined cross transfer rollers. The cut piece then rolls down the incline to a stop location, or onto another conveyor. Alternatively, the sawyer or other operator can activate pneumatic kickers to push the piece off the opposite side. 

110V 1Ph
length 4'-17" (1.2m-5.1m)
Dimensions & Requirements
length 11' 1" (3.4m) - 18'1" (5.4m)
width 6' 5" (2m)
height - inlet side 44" (1.1m) w/ 3" (76mm) of adj.
height - offbear side 36" (91cm) w/ 3" (76mm) of adj.
weight 2,112 lbs (960kg) 
shop air supply regulated at 60 psi

Pneumatic kickers can push slabs, cants or boards off the side of the roller deck for further handling.

The simple control panel comes with extra cable for mounting wherever most convenient.

The end stop can adjust to accommodate varying lengths.

Share This Page with Friends:
Email this page to a friend