Industrial Equipment


Customer Tools
The incline conveyor is designed to work in combination with the board removal system on the WM3500/WM3000 headrigs, but can be adapted to any situation needing a flat belt conveyor. As the cut piece is pushed off the mill, the conveyor receives it and transfers it up and away up at a slight incline. By elevating the board, it can then move onto a Transfer Deck, or a Three-Way Conveyor for further handling.
Specifications
Power Options
2HP Motor, 230V/60Hz 3Ph
2HP Motor, 460V/60Hz 3Ph
2HP Motor, 230V/60Hz 1Ph
5HP Motor, 230V/60Hz 3Ph
5HP Motor, 460V/60Hz 3Ph
5HP Motor, 230V/60Hz 1Ph
 
 
Capacity
maximum load capacity (IC-2) 3500lbs
maximum load capacity (IC-5) 6000lbs
maximum material length 30' (9m)
 
 
Dimensions & Requirements
Length 20' 3" (6.2m)
Width 3' 6" (1.06m)
Height (ground to belt) 45" (1.1m) w/ 4" (100mm) of adj.
Weight (IC-2) 1,345 lbs (612kg)
Weight (IC-5)  1,600 lbs (726kg) 
Belt Speed 230 ft/min (70m/min)
   
Features


A Crash bar on the IC-5 is designed to take the initial impact of heavy material.


The IC-5 is equipped with shock-absorbing legs for handling large cants and ties.

Options

It is effective, efficient, and eliminates the need for one person. It can handle slabs, boards, flitches and cants with ease. The IC-2 is designed to handle boards. The heavier duty IC-5 can handle both boards and large cants. They can be adapted to custom lengths and working heights.

Share This Page with Friends:
Email this page to a friend